Room envelope
Measure each wall from finished surface to finished surface. Record ceiling height and any soffit, column, step or change in wall depth.
Measurement guide / Bathroom vanity first-pass inputs
Measure enough to plan—not enough to manufacture.
Your dimensions make the first review more specific. They do not replace LeVika's accepted field measurement, technical coordination and drawing approval process.
01 / Four passes around the room
Work in one direction and label every uncertainty.
Consistent notes are more useful than a polished sketch with missing assumptions.
Doors & windows
Record width, height, trim and distance from the nearest corner. Mark swing direction and window-sill height.
Fixed services
Locate visible plumbing, drains, power, gas, ventilation, panels and equipment that another trade would need to verify.
Photos & context
Take one photo facing every wall, plus close-ups of obstructions, service points and adjoining-room sightlines.
Safety / Visible reference points only
Do not remove covers, disconnect equipment or enter unsafe areas.
Label uncertain conditions for professional verification. Final work must be checked against the site, appliance information and responsible trades.
02 / Bathroom vanity checks
Add the information specific to this room.
The same wall measurements create a different brief when appliances, fixtures, technology or storage inventory change.
01
Plumbing centerlines and wall conditions
02
Sink, counter and mirror dimensions
03
Door, shower and toilet clearances
03 / Put the input to work
The measurements should move with the project.
Carry the bathroom vanity measurements into the room brief.
Keep approximate dimensions labeled and attach photos or plans so LeVika can identify what still needs verification.